Problem update...

[manijoe]

I did like you guys told me to go to the bios and put the ram at pc800 and here what happend I took out al the cards except the video card and I disabled everything on the board including the USB ports. I left on the primary disc drive and the 2 cd drives. I booted it up and I got a message that the cpu setting are wrong hit f1 to setup and f2 to continue. I checked everything look ok and i got the same message. I'm thinking its because the ram settings. I format the drive setup windows xp and when it finished WAM blue screen that said somthig about a nn page fault or something like that. Is it now safe to say my memory is bad? What is happening and what can I do. THANKS!

[/url]http://www.techwarelabs.com/community/viewtopic.php?t=3386[url]

[eviltechie]

what exactly is the ram you have?

PC1066 or PC800?

[manijoe]

pc1066

[eviltechie]

well change the settings in bios back to pc1066

[eviltechie]

maybe your hard drive has bad sectors

[manijoe]

the drives are new and I had problems in pc1066 also

[eviltechie]

so maybe the rams are bad?

use this program to check if the drives are bad
http://maxtor.com/en/support/downloads/powermax.htm

basicaly narrow out the problems