dscott
11-01-2003, 01:58 AM
I have a Sil0680 RAID Controller and two 80GB harddrives connected to the controller. I setup a Raid 0 stripe set using the 2 drives. I boot into Win2k and see the "combined" drive, I partitioned it and formatted as NTFS so a total of 154GB drive. When completed, everything works fine. I can copy data to the drive. Read data from the drive, etc. However, when a reboot the computer and try to access the drive it tells me the drive is not formatted. This occurs everytime. Any ideas out there?
Thanks.
Thanks.