Techware Labs Header

Forums have moved

See this announcement for more details, or just go directly there.


Go Back   Techwarelabs Community > Tech > Operating Systems

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-15-2006, 04:41 AM
NickM NickM is offline
Junior Techie
 
Join Date: Oct 2006
Posts: 3
Default Wierd and tricky XP problem

While trying to install a demo last week I had a nasty problem happen to me. The machine basically fell over and died - not even task manager would open. I mucked around for a while and eventually ended up trying to repair windows. Not much luck there and reinstalling didn't work so I went and bought a new HDD thinking that might fix the problem. I bought new RAM as well at the same time as I'd been meaning to buy another gig of ram and a new HDD for a while.

New RAM and HDD went in and I formatted the new HDD and installed windows onto it. At that point I realised one serious issue - I had been trying to repair a SP2 Windows system by reinstalling with an SP1 disc (doh!). My new HDD was 320gig but of course I could only get a 130gig partition using my windows disc.

I went on and reinstalled windows, wacked on SP2 and downloaded security updates etc. Today I decided to stop trying to repair the old install and just go with my new one. I left the 130gig partition on the new drive (E: ) and formatted the rest of it in a separate partition (F: ). Intending E: to be the system partition, and F: for program files etc, I tried to format the old 200 gig HDD (C: ) to use for data/files and noticed in Disc Manager that while E: was apparently what I was booting from, C: was the system. Obviously my attempt to format it failed.

I went into the BIOS and swapped the boot order of the drives around, noticing that the older 200gig drive was first in the queue. When I put the new 320gig drive (E: & F: ) first, I got a NTLDR is missing error. I can see from other threads on this board how to fix that, but I'm concerned that this will result in me losing material that has reinstalled onto the C: drive. When I boot up I also get an option of 2 different systems. I always choose the top one. The bottom one used to result in me getting the corrupt file messages that I as getting before I put in the new HDD, but now I just get a blank screen.

I'm not sure why C: is still the system and to be honest I'm not sure it actually is. My documents etc are on the E: drive (if I go into My Documents through the explorer and make a new folder it shows up on E: ).

So far I've lost no data or anything and now the machine basically works but I want to sort this out.

Any advice?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:33 PM. Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Forum style by ForumMonkeys.