Techware Labs Header

Forums have moved

See this announcement for more details, or just go directly there.

  #1  
Old 08-20-2001, 02:11 AM
Hulaboy
 
Posts: n/a
Default Need help because PC crashed

I don't know if this is the right forum to put this in but since it deals with Windows crashing I guess this is where I'll put it. SPAMI'm hoping that there's someone in here that can help me out with this problem. SPAMMy PC crashed today and I'm running out of options on what I need to do. SPAMThis is what happened. SPAMAs I was starting Morpheus up, it crashed. SPAMSo, I did the 3 finger salute(CTRL-ALT-DEL) to shut it down. That was fine. SPAMWindows shut it down but once it did that it too crashed. SPAMThere was no other way of getting the system back up again other than to turn it off and reboot.

Normally, I'll get the blue scandisc screen. SPAMThat's what I got and once it got to 15% it said something about an illegal long file name and that it couldn't fix it. Alright, reboot again. I tried rebooting in Safe Mode...nothing. It'll crash during Scandisc. SPAMThe same thing goes when I try to boot off a start-up disc. Running Scanreg from a command prompt gives a "Your program caused a divide overflow error...." and then
crashes. SPAMI ran Scanreg because at one point it wouldn't let me in even through Safe Mode and it said that it encountered an invalid registry/configuration setup.

Is there anything that I can use to fix this or perhaps just get my system up so that I can get the important stuff off? SPAMI've really got some important documents on this drive and I would really hate to lose them. What about any software out there available for data recovery purposes? SPAMYeah, I know...I should've backed up my stuff. Unfortunately, those files were acquired in between schedules. I would greatly appreciate an help anyone can give. Thanks!

By they way...this is a Win98SE system.

-------added--------
Success!! I don't know what happened but I can now get in my system using a Win98SE start up disc. SPAMI still can't boot up to Win98SE successfully. SPAMSo this is what I'm thinking of doing. Due to the large amount of data I need to transfer (~4GB worth), I will probably connect a spare drive to the computer and transfer the files using DOS. SPAMOne question, I totally forgot the DOS syntax to copy from one location to the other...meaning does anybody know the DOS syntax of copying a directory (with other directories in it) to another location (i.e. drive). SPAMOnce again, I would greatly appreciate any help.
Reply With Quote
  #2  
Old 08-20-2001, 06:36 AM
awrobinsonii
 
Posts: n/a
Default Re: Need help because PC crashed


Try this command from dos prompt:
SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM
SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM SPAM (source dir:file) (target dir:file) SPAM
example type: copy c:dosnotes.doc a:dosnotes.doc

example:C:\>copy c:dosnotes.doc a:dosnotes.doc

Double check for copy to target file by typing: dir <enter>
to see what files are in the target directory to include the copied one. If there are to many files to show on the screen type: dir/p <enter>
for a partial display of the files in the directory.
Good luck got the info from my Computer Lit book from 96'. Kinda old but still has good DOS commands.
Reply With Quote
  #3  
Old 08-23-2001, 12:45 AM
shovel204
 
Posts: n/a
Default Re: Need help because PC crashed

If you can boot with the startup disk then you should be able to copy the system files to C: from the disk.
copy command.com. example would be
A:\ copy command.com c:\
This should allow booting into your existing windows.
Reply With Quote
  #4  
Old 08-25-2001, 01:41 AM
Hulaboy
 
Posts: n/a
Default Re: Need help because PC crashed

Thanks to those that replied. SPAMActually, even by making my drive as a slave and trying to get to the files that way would make my PC freeze. SPAMThis would happen even in DOS or booting up from a startup disk. SPAMI found out (painfully) that just because of those two crashes my boot record got hosed, my partition table was in shambles, some clusters near the end of the drive were scrambled, and my directory structure is whacked! SPAMGosh, that absolutely stinks! SPAMI was able to get some files out but my PC would still freeze when I tried to access them.

So, as a last resort, I'm running Lost and Found on the drive as I'm typing this. SPAMIt's been scanning this 20GB drive since 10 PM last night. SPAMIt's coming up with a couple of bad clusters and 1 unreadable sector. SPAMI'm afraid that my drive is hosed. SPAMWell, I guess this is a good reason to finally buy that 60 GB IBM Deskstar I've always wanted...hehehe.
Reply With Quote
  #5  
Old 09-28-2001, 01:35 AM
Phantom
 
Posts: n/a
Default Re: Need help because PC crashed

If you wan to copy full directories to another location try this, cd to the windows command folder, then use xcopy to copy the folders: her isthe syntax ( I think this is right /e /v the latter syntax might be /f instead of /v I cannot remember off hand. (it has been a while since I have had to do this.) eg. c:windows\command:>xcopy c:\backup /e /v d:\backup\9-27-01 SPAMI hope this helps.....
Reply With Quote
  #6  
Old 09-29-2001, 03:26 AM
Hulaboy
 
Posts: n/a
Default Re: Need help because PC crashed

Thanks for the reply Phantom. SPAMIt turned out that my drive truly was hosed. SPAMSent the drive back to Western Digital and they gladly sent me a replacement back. SPAMNow, what do I do with an extra 20 GB drive?? SPAMHhmm...make another computer of course! LOL!
Reply With Quote
  #7  
Old 09-29-2001, 03:16 PM
wizbones wizbones is offline
Golden Techie
 
Join Date: Sep 2001
Location: Stayton, OR
Posts: 699
Send a message via Yahoo to wizbones
Default Re: Need help because PC crashed

Just for general information:

XCOPY source [destination] [/A | /M] [/D[:date]] [P] [/S [/E]] [/V] [/W] [/C] [/i] [/Q] [/F] [/L] [/H] [/R] [/T] [/u]
[/K] [/N] [/O] [/X] [/Y] [/-Y] [/Z] [/EXCLUDE:file1[+file2][+files3]...]

source SPAM Specifies the files(s) to copy

destination SPAM Specifies the location and/or name of new files

/A SPAM Copies only files with the archive attribute set, doesn't change the attribute.

/M SPAM Copies only files with eh archive attribute set, turns off the archive attribute

/D:m-d-y SPAM Copies files changed on or after the specified date.
if no date is given, copies only those files whose source time is newer than the destination time.

/EXCLUDE:file1[+file2][+file3]... SPAM Specified a list of files containing strings. When any of the strings match any part of the absolut path of the file to be copied, that file will be excluded from being copied. For example, specifying a string like \obj\ or .obj will exclude all files underneath the direct obj or all the files with the .obj extension repectively

/P SPAM Prompts you before creating each destination file.

/S SPAM Copies directories an dsubdirectories except the empty ones.

/E SPAM Copies directories and subdirectories, including empty ones. Same as /S /E. May be used to modify /T.

/V SPAM Verifies each new file.

/W SPAM Prompts you to press a key before copying.

/C SPAM Continues copying even if errors occur.

/I SPAM If destination does not exist and copying more than one file, assumes that destination must be a directory.

/Q SPAM Does not display file names while copying.

/F SPAM Display full source and destination file names while copying.

/L SPAM Displays files that would be copied.

/H SPAM Copies hidden and system files also.

/R SPAM Overwrites read-only files.

/T SPAM Creates directory structure, but does not copy files. Does not include empty directories or subdirectories. /T /E includes empty directories and subdirectories.

/U SPAM Copies only files that already exist in destination.

/K SPAM Copies atrributes. Normal Xcopy will reset read-only attributes.

/N SPAM Copies using the generated short names.

/O SPAM Copies file ownership and ACL information.

/X SPAM Copies file audit settings (implies /O).

/Y SPAM Suppresses prompting to confirm you want to overwrite an existing destination file.

/-Y SPAM Causes prompting to confirm you want to overwrite an existing destination file.

/Z SPAM Copies networked files in restartable mode.

The swith /Y may be preset in the COPYCMD environment variable. This may be overridden with the /-Y on the command line.

The XCOPY command may differ depending on OS version you are running. To ensure the correct commands at the DOS prompt type xcopy /? to list the commands on your version of xcopy as listed above.

Just thought it was appropriate for this string. We all should keep up on the older command line stuff!

__________________
Wizbones PC
http://www.wizbonespc.com
--------------------------------------------------------
The Maximum Effective Range of an Excuse is Zero point Zero Meters!
Reply With Quote
  #8  
Old 10-06-2001, 01:25 AM
Hulaboy
 
Posts: n/a
Default Re: Need help because PC crashed

More than I needed to know about XCOPY but I know it will definitely come in handy one of these days! Thanks for the info.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:12 AM. Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Forum style by ForumMonkeys.