Forums have moved

hi,

i've recently bought a new computer, containing the following hardware:

• motherboard - ASUS A8V Deluxe 2000MHz
  system memory - 2 * 512Mb DDR-RAM Kingston
  processor - AMD Athlon 64 3700+ San Diego
  graphic card - Ati Radeon X700 Pro 256MB AGP 8x
  Hard Drive - 1 * 250Gb SATA Maxtor, and 1 * 40Gb Maxtor IDE

well, when i started my computer for the first time, and i install windows XP Pro, everything worked just fine. When i installed the motherboard drivers, it all worked just fine, but when i installed my graphic card drivers, my computer doesn't want to start up windows.

Does anybody knows what the problem is? i hope it has nothing to do with hardware that is not compatible with my motherboard or something

thanx in advance,
UnrealEd

Hold down F8 or F5 while the system is booting up and loading Windows so that you can enter Safe Mode (minimal use of drivers). Uninstall the video card drivers and try another stable version.

i did just as you told me too, but theres no change.

when i downloaded the newer version of my graphic card controller, and installed it, it said there was no card to be found.
he wont even startup now.

any thoughts?

thanx, UnrealEd

So your computer doesn't boot windows at all? what does it do?

__________________
Microsoft believes in making computing easier! What could be easier for consumers than having only ONE choice of software?!?

well, when i press the power switch, everything starts working, but nothing appears on the screen. something i can't even enter my bios.

the times i can enter windows, it starts freaking out. my screen starts flashing, everything fades away, and then my computer restarts for no reason, displaying nothing when it should be.

any thoughts?

Well if it happens when the computer first starts up it isn't a driver problem. I've been actually having a similar problem recently where I would turn on the computer and you can hear it booting up normally but the screen shows nothing, and it seemed sometimes it would work and sometimes it wouldn't. I have switched and tested many parts and came to the conclusion that it is the motherboard.

Anyway, what I would do first is clear the CMOS and see what happens. If nothing then I would just switch out hardware and narrow down what part is at fault.

__________________
Microsoft believes in making computing easier! What could be easier for consumers than having only ONE choice of software?!?

it didn't happen when i booted my system for the first time, it happened when i installed windows and the vga driver.

when i uninstall the driver, everything works just fine

so, any ideas?

I don't see how nothing would appear on the screen, not even the BIOS when the drivers are installed and it all works fine when they aren't.

Did you try clearing the CMOS? What driver version are you using exactly? Have you tried any other older version drivers?

__________________
Microsoft believes in making computing easier! What could be easier for consumers than having only ONE choice of software?!?

I just wanna point out that they dont make San Diego Chips for socket 754.. what you have is a ClawHammer =P

__________________

are you sure, cause this is what i ordered:

well,...
it seems that no one knows what the exact problem is.
Could it be that there's something wrong with my motherboard? or my graphic card itself?

thanx allready,
UnrealEd