|
Kingwin 700 Watt Power Supply
Introduction:
It is another fine day here at TechwareLabs, and today I would like to introduce you to the Kingwin MACH 1 700 Watt power supply. This baby is neat, tidy, and screams out: "I make your awesome case look even better." This power supply has everything: quiet operation, LEDs, and Kingwin even threw a 140 x 140 mm fan into the mix to keep it nice and cool. Looks aside, the question still remains: Does it perform as well as it looks? Read on to find out.
Features:
1 |
Special cable management system. |
2 |
Comply with Intel ATX/BTX standard. |
3 |
Four PCI express connectors. |
4 |
Six SATA connectors. |
5 |
One bottom blue led fan (140 x 140 mm). |
6 |
Support EPS & Intel 945/955/975x chipset. |
7 |
ATX 12V Ver.2.91 |
8 |
AC Input 115 & 230V. |
9 |
Output gold-coated connector |
10 |
Output over / under voltage protection. |
11 |
Output short protection. |
12 |
Over load protection. |
13 |
Nickel-Plated. |
14 |
Quad 12V rails. |
15 |
Nvidia SLI certified. |
16 |
Aircraft style modular connectors. |
17 |
Built in auto fan-speed sensor. |
18 |
NVIDIA® SLI™-ready certified |
Specifications:
Maximum power: | 700 Watts. |
Frequency range: | 47 ~ 63Hz. |
Input waveform: | Sine wave, modified sine wave or square wave. |
Input maximum current: | 10.7A@115V. |
6.2A@230V. | |
Withstand voltage: | Input to output 1800Vac 3 sec. |
Input to ground 1800Vac 3 sec. | |
Efficiency: | 70% minimum at full-load. |
Overpower protection: | 105%~150% |
Over voltage protection: | +5V output is between 5.7V to 6.5V. |
+12V output is between 13.2V to 14.4V. | |
+3.3V output is between 3.7V to 4.1V. | |
Under voltage protection: | +5V output is between 3.3V to 3.7V. |
+12V output is between 8.5V to 9.5V. | |
+3.3V output is between 2.0V to 2.4V. | |
Unit dimension: | 6 3/8"(161 mm) L x 5 7/8"(150 mm) W x 3 3/8"(85 mm) H |
Unit weight: | 6 lbs. |
MTBF: | 100,000 hours under the following conditions full-rated load, 120Vac input, and 25C ambient. |
Switches: | ATX Logic power rocker switch. |
Fan size: | 1 - 140 mm x 140 mm x 25 mm bottom fan. |
DC OUTPUT |
||||||||
Output Voltage |
+3.3V |
+5V |
+12V1 |
+12V2 |
+12V3 |
+12V4 |
-12V |
+5VSB |
Max. Load |
24A |
30A |
18A |
18A |
18A |
20A |
0.5A |
2.2A |
Min. Load |
1.0A |
1.0A |
0.8A |
0.8A |
0.5A |
1.0A |
0A |
0.1A |
Regulation |
±5% |
±5% |
-0.71428571 |
-0.71428571 |
-0.71428571 |
-0.71428571 |
±10% |
±5% |
Ripple & Noise(mV) |
50 |
50 |
120 |
120 |
120 |
120 |
120 |
50 |
Total Power |
700W continuous output @ 50C ambient temperature |
Real Time Pricing: