|
SilenX Power Supply Review by Jason Jacobs on 12.01.03
Testing the SilenX Power Supply: The SilenX 400W power supply was tested under load and idle and voltages recorded. Prime 95, and Battle Field 1942 were used simultaneously to stress the system. A Craftsman 82022 Autoranging Multimeter was used to monitor the voltages in each of the lines. The results are as follows:
As you can see the voltages were very steady under system stress and at idle. Voltages shown are of the system under load.
|
|
:: Copyright © 2002-2008 Techware Labs, LLC :: All Rights Reserved |