Techwarelabs Community - NTLDR is missing

Page 2 of 2

Show 40 post(s) from this thread on one page

Techwarelabs Community (https://www.techwarelabs.com/community/index.php)

- Operating Systems (https://www.techwarelabs.com/community/forumdisplay.php?f=17)

- - NTLDR is missing (https://www.techwarelabs.com/community/showthread.php?t=8416)

Jason425

02-28-2004 10:16 PM

ok.. boot from the cd and install lol...

vee_ess

03-03-2004 10:26 PM

Make sure you are booting off the CD and the BIOS is set to boot from CD.

delphineus462

04-17-2004 03:01 PM

I am having the same problem with the error message. Did anyone ever figure this out?

Jason425

04-17-2004 07:51 PM

Quote:

Originally Posted by James

NTLDR is missing just means your MBR got messed up or something along those lines and the program that is used to get windows to turn on can't be found. This isn't a big deal. There are several ways to fix this. I believe the most common is to pop in your XP/2000 cd, boot, get to the command line, and do a fix /mbr or something along those lines. i'm heading out right now, so i can't grab yo uthe exact command, but googling or MS's technet site should prove to be very useful. I wouldn't be too worried about this unless you are getting many errors. That could indicate that your harddrive is dying and that it is corrupting files on it (which means you should get those files off that harddrive as soon as possible). but htat's only if you start getting many errors about different files being missing/corrupt. one or two or so shouldn't be thought of as a big deal

cherrypie

04-20-2004 06:15 PM

this should be in the OS section...... if you have already installed windows and this is coming up u need to re-install...

Prometheus

04-20-2004 07:59 PM

recreate the partiton i had this exact error

once booted just format and recreate the partition

ybeddyj

05-27-2004 04:11 PM

Well from the look/sound of things it seem that you/someone else had use win2k/Xp to write signature to the harddrive / create primary partition. this process usually sets the partition as active as well thus indicating that it may be booted from. this may pose a problem if u dont arrange the devices properly in your pc and your bios isnt set so as to provide the desired results. this as your xp cd wont recognize that u'r hard disk drive is clean so to start setup automatically.

What you need to do is make sure that you set the first boot device in u'r bios to be cdrom.
at boot stage the system will boot from the cd(*provided that u'r OS cd is bootable and you remember to put it in the drive prior to it checking for the cd*).
it'll give you about 5 seconds to press any key to boot from the cd (again) if you do press a key in this time it'll boot finally from the cd and start textmode setup process
Then you should be good to go

twobells

06-23-2004 04:43 PM

Do you have a external usb hard drive installed on your system?

Many times if i forget to turn off the external usb drive I get that exact message.
Basically the bios can't handle the confusion.

What is truly odd is that my new Asus SK8V (a awesome board) has USB 1&2 detection in bios yet the same thing happens if I don't turn off prior prior to shutdown or on booting.

TwoBells

All times are GMT -5. The time now is 01:32 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page