I've also been trying to figure this out and just spen the last hour going through all these posts :biggrin: Here is a website i've found that i didn't see posted here...

http://a26.lambo.student.liu.se/?sec...project=vgalcd

LTM150XI

Where can I find this and not have to purchase 1000 of them? lol... I found a few places that sell them but you have to buy in bulk. They are about $180 a piece but I only want 1... okay maybe 2 or 3... but not 1000!

I am starting
 

Well, I am ganna start a project. Ill be posting Pics of the stuff i already have.

Ok
 

I got a AA11SB6C LCD screen. I am looking for a Converter board if anyone could link me to a cheap one. Thanks.

Controller?
 

Hey what's up. A while ago I took off two laptop screens from some old laptops i found and wanted to hoook them up to my desktop.

What is a controller? Would I have one in an old laptop?

Thanks

LCD Screen on side of Case
 

:dance: Ihave been working on this Mod for almost 4 months late nights tearing apart 5 Laptops to see that none of :dance: them have the same connection so what am I to do , well i tell you what my only other :dance: feasible option that i haven't even :dance: seen thought of Before is to look at it another way. if you can't add a LCD to your computer why not try and add a laptop. :dance: WAIT before you skip over THIS
:dance: I Don't Mean put a cable from PC to Laptop but I mean Why not place the whole thing on the inside of a medium to large :dance: size case and see if there is a way to connect it internaly so that you have all the connections up and running are ably to:dance: leave the ports accesible and able to share info. there must be a way to adapt one MOBO or the other to accept at least:dance: some data. i am currently working on this still and i don't think that i will be able to move on to any other mod until i finish:dance: this one way or the hammer LOL :nod: well i'll keep you posted let me know if you have any ideas.

Yahoo group please visit please post so i don't look crazy
 

I recently created a yahoo Group called Case Mods please join or post or let other people know so that we can have a group on yahoo that actuall is about case modding i went to the other case modders groups and they were all a bunch of spammers. i hate spem so i made my own.

please help me get the word out so that this can become a good place to get help or parts or help others thanks


http://groups.yahoo.com/group/casemods/join
:dance: :dance: :dance: :dance: :dance: :dance: :dance: :dance: :dance: :dance: :dance:

i just acquired an LCD from a dell 2650 today, and am gonna hopefully figure this out. so far as i can tell i may need to rewire the ribbon from the LCD, BUT im gonna need to convert the signal to analog. fortunately for me the graphics card was a seperate unit (dunno if thats normal or not) an i got the too. is there poosibly a PCI card that will handle the connector directly from the LCD, or possibly from the Video Card/Chip in the Laptop? heres what im workin with:

The 2650 came with 2 screens (both made by LG/Phillips), a 14.1" (LP141X8) and a 15.0" (LP150X2 or LP150X04). I'm trying to find pin assignments for those screens (they use an LVDS 1 port interface).

Here are the pin assignments for the DVI interface:
1 T.M.D.S. Data2-..............9 T.M.D.S. Data1-..................17 T.M.D.S. Data0-
2 T.M.D.S. Data2+.............10 T.M.D.S. Data1+...............18 T.M.D.S. Data0+
3 T.M.D.S. Data2/4 Shield.11 T.M.D.S. Data1/3 Shield....19 T.M.D.S. Data0/5 Shield
4 T.M.D.S. Data4-..............12 T.M.D.S. Data3-.................20 T.M.D.S. Data5-
5 T.M.D.S. Data4+.............13 T.M.D.S. Data3+...............21 T.M.D.S. Data5+
6 DDC Clock......................14 +5V Power........................22 T.M.D.S. Clock Shield
7 DDC Data.......................15 Ground(return for +5V, HSync, and VSync)23 T.M.D.S. Clock+
8 Analog Vertical Sync.......16 Hot Plug Detect................24 T.M.D.S. Clock-
C1Analog Red....................C2Analog Green...................C3Analog Blue
C4Analog Horizontal Sync.C5Analog.Ground (analog R, G, & B return) Digital Only Connector

i couldnt even find the model numbers you just posted, of course i had to go to work... but thanks! ill def look too!

i can almost say for certain that its the 14.1, the other specs were 128mb, 20gb, std. spkers, plain cd drive, floppy, and so on.