Techwarelabs Community

Techwarelabs Community (https://www.techwarelabs.com/community/index.php)
-   Hardware (https://www.techwarelabs.com/community/forumdisplay.php?f=9)
-   -   Treo 600 Unlocking! (https://www.techwarelabs.com/community/showthread.php?t=6500)

Mol 09-04-2004 03:00 PM

For all you guys having problems with unlocking the Treo 600, you may want to pay a visit to the site where the patch originated from: mytreo.net

If you need the patch, go to the General Treo Chat board and you will quickly see how to obtain it including detailed instructions. If you're having problems installing it or experiencing resets, search the forums or just post your problem - there are hundreds of people around that can help you out.

deengo 09-10-2004 08:05 PM

Re: Treo 600 Unlocking!
 
[quote="Keefe"]Ever since I bought my first Treo 600 I set out to find how to unlock it. Unforunetly, I never solved the problem for myself. A few fellas from Treocentral.com, however, did solve the problem.

Here are the instructions on how to fully unlock any Treo 600:

Unlocking is actually quite simple:

Part One:

1. Download and install Card Export. NOTE: The Card Export shareware install file is attached to this post.

2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to.

3. Dowload the flash, patched.zip, here.

Part Two:

1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.

2. Hard reset the Treo.

3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.

4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).

5. Sit back and relax, it's going to take a good 10 minutes.

6. The phone will automatically hard reset at the end of the process.

That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version. I recommend you do the regular upgrade first though.

Good luck!

Hi.....I did the above exactly as stated and all went well. However, I cannot turn on the wireless mode. When I trun it on, it acts as though it's going to turn it on and the screen goes black....only to have the 'Palm Powered' logo come on. It seems it resets everytime I attempt to turn on the wireless mode and it still doesn't turn it on. What can I do? :confused:

deengo 09-10-2004 08:33 PM

Cannot turn on 'Wireless Mode' after applying unlock patch
 
Hi.....I did the above exactly as stated and all went well. However, I cannot turn on the wireless mode. When I trun it on, it acts as though it's going to turn it on and the screen goes black....only to have the 'Palm Powered' logo come on. It seems it resets everytime I attempt to turn on the wireless mode and it still doesn't turn it on. What can I do? :confused:

deengo 09-11-2004 09:18 AM

Re: Treo 600 Unlocking!
 
I followed the following steps below and all went well with the installations. However, I can no more turn on the wireless mode....any suggestions as to what I can do? When I try to turn it on, it resets and just goes back to the 'wireless mode is off' mode.

Gorex



Quote:

Originally Posted by Keefe
Ever since I bought my first Treo 600 I set out to find how to unlock it. Unforunetly, I never solved the problem for myself. A few fellas from Treocentral.com, however, did solve the problem.

Here are the instructions on how to fully unlock any Treo 600:

Unlocking is actually quite simple:

Part One:

1. Download and install Card Export. NOTE: The Card Export shareware install file is attached to this post.

2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to.

3. Dowload the flash, patched.zip, here.

Part Two:

1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.

2. Hard reset the Treo.

3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.

4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).

5. Sit back and relax, it's going to take a good 10 minutes.

6. The phone will automatically hard reset at the end of the process.

That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version. I recommend you do the regular upgrade first though.

Good luck!

Click on some banners while you are here!


helpless 09-14-2004 10:21 AM

Help for Treo 600
 
After running the FirmUpdater properly the problem became even worse: Turning on the wireless-application the phone (plays the sound and shows the picture but then) turns completely off (like a soft reset)!!
Can someone help me?
:rofl:
My net: Vodafone D2 Germany
Software "Treo600-1.12-ROW" (no IMEI, SA, Firmware; Hardware: A)

lancewright 09-26-2004 09:10 AM

I tried this.

As a Mac user, I moved the files using a card reader, and ran the update.

The update seemed to work ok.

But, tt ended up disabling my phone. The palm side worked, but my IMEI number was deleted, and subsequently no longer was seen by ORANGE.

I activate wireless, and it just resets.

I've called Orange, and they are replacing the phone.

:( Lance Wright

Charlydax 10-20-2004 04:11 PM

It wanted to be thankful specially to each one of this topic to "Keefe" by the provided information. Same me it has been helpful and thanks to it I again have my unblocked Treo.

Thanks for all!!!

Greetings...
Charly

Jason425 10-20-2004 04:19 PM

that is painfully bad english.... but hurray for you're "unblocked" treo ;)

Mol 10-22-2004 02:54 PM

Quote:

Originally Posted by Charlydax
It wanted to be thankful specially to each one of this topic to "Keefe" by the provided information. Same me it has been helpful and thanks to it I again have my unblocked Treo.

Thanks for all!!!

Greetings...
Charly

You're more than welcome. BTW, the version on mytreo.net (from the people that created the patch) includes detailed instructions on how to apply the patch, how to fix the most common problems, and a helpful forum with a few thousand people that have used the same patch and are more than willing to help anybody having problems with it.

peter3138 12-12-2004 08:56 PM

Does your treo unlock instructions work with sprint pcs?
 
I got a treo 600 pcs sprint phone and I badly need to unlock it.
I did some research and found out that unlocking gsm version is not a challenge but I couldn't find antything on sprint pcs.
Can U guys help me with that?


All times are GMT -5. The time now is 02:19 PM.

Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.