removing hardware firewall in router
 

How do I disable the hardware firewall that came with my D Link 704P router on Windows 98? I only have two computers hooked up to the router.

**i want to be able to hsot multiplayer games.

Hrm, I dont think that you can disable the firewall with that. The only thing I can think of is adding your computers to the DMZ. That will allow all web traffic to be passed through.

Or just open the ports required for the games

Hello my good man. How are you today? I have the answer to your problem. The D-link DI-704P has an option for you to set your PC outside of the firewall. Go to the configuration utility and click on advanced at the bottom of the page. Then click on MISC ITEMS. At the top it will give you the option to enter an iP address for the DMZ HOST. Make sure that the IP Address in the text field is the same as the one for the system you wish to use. Click enable, and save the settings. POOF! Your ready for some frag Action. Only do this if specifying the ports won't work. Check the FAQ pages at the games website to see what they are. If they are not there you will find it somewhere. Setting yourself as the DMZ host makes you vulnerable to hackers, especially if you have a home network. When you are all done with your games disable the DMZ host settings for your own saftey. :) I hope this helps.

Yea...
 

Can you just tell me how i can configure my ports to open the required ones? i know which i need, i just dunno where i can get to them.

Don't even try it that way. I tried it and could not get it to work. You have to setup a virtual server. Just set the DMZ. It's the only way.

i game alot on the PC im using now too
so i enabled DMZ host for this comp

its pretty vulnerable
but i have a software firewall so it is semi-ok i guess

what the hell?

well obviously this guy didn't know what he was doing because it is not the only way...

which games do you want to host?

i seperated all the port numbers sequentially and set them up for each game to run through that port. may be a little more complex this way but i know all my open/fixed ports.

if you give me the names of the games i probably could give u the port listing for it.



or if you're not especially worried about hackers then go for the dmz host, its a quick fix i guess... oh yeh, if u set it to dmz give me your ip ;) j/k 8)

Technically you should be able to just forward the necessary ports (create virtual servers) on the firewall to allow for hosting a server, without creating a big security risk. Unfortunately, some applications/games require UDP packets to be forwarded in addition or instead of TCP packets. I know that in the past, at least Netgear decided that UDP pacets were unimportant, so didn't have an easy way to forward them with virtual servers, that I know of. I can't vouch for Linksys or D-Link on this topic, but that may be an important factor to consider.

If I recall correctly, Quake 3 uses port 27960 on UDP. I don't know about CS, or SoF2, Batlefield, MOHAA2, or other things offhand. If you figure out what ports you need forwarded, or tell us what game you're trying to host and we figure it out, and it's still not working, I'd suggest looking at this issue.

CS is 27015
all half life games uses that b/c its hl's

if the router's access control has groups then the default group is
all hosts except those listed on the other groups

Group 1: 100-199 members

Group 2: 50-99 members

Group 3: 1-9, 20 members

port 25 is send email
port 110 is receive email
port 80 is browse
port 119 is read net news
port 21 is default for FTP

those are basic ones that i suggest opening if you arent being hacked 24/7

this reminds me, 2 years ago, my comp was under constant attack by anonymous ppl
some how my ip was publisized and made a public target...
24/7 hacking
good thing Lockdown 2001 stopped all of them...
except twice...

I play rainbowsix and age of the empires 2 , do you think you could give me the port numbers, and then how do i open them?? and will i have to do this to both of my computers or do it in the router?

You'll do this in the router. Generally there's a web-based configuration page (http://192.168.0.1 or http://192.168.1.1 are common), where you'll set up new entries for NAT Port Forwarding or Virtual Servers.

I don't know those ports offhand, but if no one else knows, I'll look 'em up.

Some games will let you do this and some will not. I have Rogue Spear and the Raven Shield Demo. Rogue Spear will only allow me to host games if the server is set as the DMZ and Raven Shield let's me use port forwarding. try opening a range of ports and routing them to the servers IP. It's really easy man. just go in there and try a few things. play with it man, it won't bite you.

about quake 3...
 

I cannot connect to any online game. I have a 100% ligit cd key and it always gives me the invalid cdkey thing. I know that it is because of my dmz host. I am currently not the DMZ host but my bro controls the router and i cannot change that. Now is there a way i can get online to play or not?

Thx for the help in advance

You would have to just be a client. Unless you can forward those ports there is really not much else you can do.

I got a linksys wireless router and i know that i need to open the port 27015 for counter-strike but i don't know were to go!! Some plz help

RE: The guy who said it's easy to just open ports for games
 

Ok, the port for RF Demo is 7755, right?! I opened that port, just like everyone else who can't get it to work, and still no go. If it's so easy, then tell me how. I'm dying to know...
Obviously either RF demo is using another port as well, or a UDP port, or a non-TCP/IP protocol, BUT WHICH?! Becuase it doesn't appear to be published. I have a port list of ALL the TCp and UDP ports and failing opening all, or trying one by one, just opening the port 7755 which rf demo uses doesn't fix it. Please enlighten me o' learned one :P

I won't hold my breath...