Oh... my mistake. To answer your questions:

The PolarFLO Universal Water Block mounts via the 4 mounting holes on the motherboard that comes on both AMD and Intel systems. Right now there is about a 50/50 split on the AMD motherboards that do not come with the mounting holes. This problem will soon be remedied with a clip that will allow mounting to the AMD Socket A directly. The PolarFLO comes with 4 nylon bolts, washers, thumbnuts and 5 hose clamps and a Y-splitter. That is more than enough to get one started.

As for the 3 connectors. First let me explain the premise of our water-cooling theory. The center connector is the inlet. The center inlet is responsible for delivering the supply of water directly over the chip. This center inlet is specially designed to bring a high velocity jet of water about .020 over the top of a special geometry machined into the copper base. This now brings us to the reason for 2 outlets. In order to eliminate uneven convection inside the water block it needs to have a relatively symmetric flow. With one connector the flow would be limited to very uneven flow. The addition of a second outlet, we created a more symmetric flow and also made it possible for the flow exiting the inlet nozzle to reach its maximum possible velocity.


This is the best performance water block on the market. Wait until you read Jason's Review.