View Single Post
  #8  
Old 10-17-2005, 01:43 AM
james
 
Posts: n/a
Default

DO NOT USE RAID0!!! Unless you absolutely positively know you need it (this is almost certainly not your case). RAID0 does have some performance increase, but with IDE it's not so big. Further, it dramatically increases the chances of you losing all of your data for various reasons.

Besides, if you are using two different drives for RAID, the benefits of it decrease dramatically, particularly with striping. The data writes need to be synced, so any difference in the drives can really kill that syncing process and greatly the diminsh the benefits.

IMO: Just setup two drives. Raid is fun until it screws up. I had a 'functioning' radi0 array for some time with two (good) identical drives on what was considered a 'good' ATA RAID card. My entire MP3 collection was corrupted to some degree due to syncing issues that the driver failed to correct. So yea, unless you hvae a highend, hardware driven RAID card for SATA or SCSI and REALLY need RAID0 (you don't) there's no point. Especially if you are using it for storage, you won't notice. A raid0 setup w/ 2 10k raptor as an OS drive (backed up regularly, due to the failure issue that will never go away) will let you see some real performance differences. otherwise, it's a waste of time and effort. (and harddrive space if you have different drive sizes)

edit: good example of why not to do raid0: http://episteme.arstechnica.com/grou...2004094731/p/1
Reply With Quote