Antec 1030B Soho File Server case
300 W Power supply
Athlon XP 1700+
256mb DDR PC-2100
Leadtek Titanium 200T-Gforce 3 ti200
Sound Blaster 32
2 30gig ATA 100 drives on a RAID-0
12x DVD
12x CDRW
120mm fan on top
92mm fan
4 80mm fans
cyclone case cooling fan
Hard Drive cooler

The 92mm fan points directly at my Cards inside. The 120mm fan blows air in from the top. I know it should be sucking it out but it seems to run cooler this way. Then there is the one 80mm blowing on the drives and another at the bottom. The other two suck air out the back. I have a bay bus controlling most of the fand but I need to add the 92mm. I used a hole saw to cut the 120mm hole and a dremmel for the 92. For the 120mm fan I used a PC MODS Fan Kit. It came with a molding for the edges of the hole. If anyone knows what to use as a grommet for the holes let me know. I got one with my 120mm but I need one for the 92mm and don't want to buy it over the net. I am going to add about 4 more real small fans to suck air out of the back of the case also. After that I'll probably be done with fans. None of my hard ware is over clocked right now. I won't be doing that till I am all done with the fans. Then, let the MHz flow. There are two lights inside that are controlled by two switches on the front. As soon as I have the cash I am going to buy a new power supply and a RAID controller for some SCSI drives that I have lying around. When I am all done it should make a pretty good gamming rig.