View Single Post
Old 08-17-2002, 08:28 PM
Posts: n/a

Sure I can help. Take the drive out of your machine. There should be a little hole on the front of it. Stick something in there and the drive should open. I use a coat hanger. Remove the bezel from the front of the tray and then take the bezel off of the other part of the drive. You should be able to do it by sliding the bezel. Some drives are different so you may need to mess with it a bit but you will get it. I used masking tape and a razor blade to cover up the LED part of the bezel but some drives make it easy to just remove them. Now you paint. It's pretty easy. Let me know if you need anymore help. This should get you started though.
Reply With Quote