Are you tired of dust

We all know dust is bad for out computers.  It builds up on everything.  It cuts down on the heat transfer to the circulating air and when you get dustbunnies in you slots that can't be good.  So I did something about it this week.  I had bored out all the holes in the front of my case so my fan could breath better and draw more air a while back.  This time I took the dremel and cut off half of the front plastic part of the case.  I added a couple of magnets to hold back in place and some screws I could turn in or out to make it set right.  Then I got a foam element out of a wet dry vac (just cause it had a real fine foam in it).  Cut it up into two pieces and put them in the now removable half of the front of my case.  Added some oil from a wet based car air filter (the oil is sticky and helps grab more of the dust as it passes by). Slapped it together and look allright but more importantly if work real well.  My intake fan sucks all of it's air through the filters and keeps a lot of the crap out of my case.  And the foam also cuts down on the noise of the front fan.  It's almost half as noisy as it was.  Done it for about $10 American which I think makes the mod even better.