Techware Labs Header

Forums have moved

See this announcement for more details, or just go directly there.


Go Back   Techwarelabs Community > Tech > Consumer Electronics

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-21-2007, 10:18 AM
cobraxus cobraxus is offline
Junior Techie
 
Join Date: Oct 2007
Posts: 2
Default Sil0680 SD-ATA133I non-RAID PCI IDE Controller Card

below describes the set-up for my problem:

To set the boot device on the Syba ATA133I, reboot the system in which the card has been installed. During the boot cycle, the card will post and show the following message:
Sil 0680 ATA/133 Controller Bios Version 3.2.10
Copyright © 1997-2003 Silicon Image, Inc.
Press F3 to enter Configuration Utility
Press F3 to enter the BIOS. The card will then display the devices attached to the card and will show the following lines:
Press F1 to assign first (HDD) set
Press F2 to remove first (HDD) set
Press ESC to exit
Press F1. The screen will then show:
Enter the Set number selected
Press ESC to exit
Your Selection?
Enter the set number of the drive that you want to become the boot drive.
Press ESC to exit the utility.
Your selected drive will now become your boot drive.
In addition to these settings you will also need to adjust the motherboard’s BIOS to boot from the Syba SD-ATA133I IDE controller. Please refer to the motherboard’s documentation on how to choose a boot device in the BIOS.
Note:>/b> The process of assigning a boot device would not need to be utilized for attaching non-bootable devices such as DVDs or CD-Burners.

I'm running WinXP Home Edition(SP2)with an ASUS P5GZ-MX motherboard and Intel Celeron D 3.06GHz.my DVSKOREA DVD-ROM DSR1600H is connected to the PCI IDE Controller card.BIOS detects it but my computer does not.device manager indicates the card is working properly but cannot detect the DVD-ROM connected to it.I've installed/uninstalled/reinstalled the drivers countless times.moved the IDE card to a different PCI slot and upgraded BIOS to no effect.can anyone please advise me on this?
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:34 AM. Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Forum style by ForumMonkeys.