Techware Labs Header

Forums have moved

See this announcement for more details, or just go directly there.

Old 09-15-2003, 02:30 PM
Posts: n/a
Default polarflow flowrate?

I've got one of your blocks but not installed yet. (1/2 barbs) What is your thought on setup...

From the cpu cooler have one outlet running to the gpu cooler and the other to a chipset cooler or flowmonitor. then the two lines going back to the res w/o joining back together.


everything inline.

The pump will be either an eheim 1250 or the Hydoe L30
Reply With Quote
Old 09-17-2003, 09:35 PM
Posts: n/a

The outputs on the PolarFLO may be arranged in many ways. As long as you do not choke the flow on either of the outputs more than would occur if both outputs were combined into one line. The flow design was made to allow the two outputs to be plumbed back into one 1/2" ID line. Choking it any more than that will adversely affect performance. Presumably if you took both outputs and put them each directly into the reservoir, one may see a small increase in perfomance.

Good luck on your project, our GPU/Chipset water blocks will be out soon.

Best to all.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 08:54 PM. Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Forum style by ForumMonkeys.