Techware Labs Header
RSS
Home | Reviews | Articles | Downloads | Guides | Staff | Advertising | Links
Mainboards | Networking | Video | Cases | Storage | Other

Tuniq Ensemble 1200 Watt PSU


Author:  Matthew Homan
Date:  2008.09.30
Topic:  PowerSupply
Provider:  Tuniq
Manufacturer:  Tuniq




4213

Tuniq Ensemble 1200 Watt PSU

Tuniq

Introduction:

The power required by custom gaming systems today have reached levels of demand never seen before. High-end PC rigs with two and three video cards running in SLI are pulling two hundred to three hundred Watts or higher each. Also, those of you out there who are on top of things are overclocking processors and water cooling them, you can add another two hundred Watts of drain on the power supply. Of course if the rig is tweaked this much, then it is probably running a few hard drives in a RAID in order to get the best disk access times possible. Now, add on a few Watts for a DVD ROM(s) (under load) and case fans, your probably pushing your present power supply past its best efficiency output, resulting in a shorter life of the power supply and more heat. The engineers at Tuniq have a solution; their 1,200 WATT monster they call the Ensemble. So, lets take a look at what is has to offer.

emseble

unboxed

Features:

Max efficiency 87%, Average Efficiency 86%
Minimum 82.3% efficiency at 100% load
Super Quiet Operation (1500RP M, Noise under 30 dBA at 100% load condition )
Japanese Ripple Capacitor
Advanced Off-Line Cooling Function (Fan will not stop working until the temp below 50)
13.5cm 2-Ball Bearing Fan +8 cm Fan
Active PFC
3-year warranty
220mm*148mm*85mm

 

24pin
4+4 -8pin
8pin
molex
1 X 24 Pin ATX
1 X 8 Pin (4+4 configuration) 12V
1 X 8 Pin 12V
2 X 3 Molex
6pin
8pins
sata
2pin
2 X PCI-Express 6 Pin
2 X PCI-Express 8 Pin
2 X 3 S-ATA
1 X 3 Pin
4pin floppy
2 X 4 Pin Floppy

 

REALTIME PRICING




« Back Home
Specs and Features »