Techware Labs Header

Forums have moved

See this announcement for more details, or just go directly there.

  #11  
Old 11-24-2003, 08:44 AM
Gaspode
 
Posts: n/a
Default

Quote:
Originally Posted by eviltechie
gaspode, have you got 3.9 yet?
no - my 9700pro is out of any pc now and put to one side - I have tried it in 3 different pc's and all show the same problem but in various degrees of extremity.

Only thing is that they are all based on Nforce2 mobo's.

I do have another system recently built based with an ECS mobo so I will try it in there.

Some obeservations:

When I play Unreal Tournament in OpenGL the corruption is at it's worst.
Even when I close down UT the desk top is also badly corrupted.
However - if I change to D3D mode the corruption stays away and if it does come is not so severe.
Also pressing F9 in game creates a screen shot and forces UT to do a 'pre cache' which clears the screen of all corruption.

This is running under 3.5 cats.

My own Shuttle is put to one side and I am working off my girlfriends Shuttle on a 9500non-pro.

I am getting a 2nd paw 9800pro and it is a Hercules - the ram chips all have heatsinks and the fan looks a little more substantial.

Another thing that will make a difference in the cramped Shuttle is a different hardrive.
I was using a Maxtor s-ata 120gig but it failed last week.
I will be getting a Samsung hd - apperently runs quieter and cooler.
And I will have no need to have the s-ata interface card in the pci slot so that removes a barrier between the gafix and internal fan.

3.6 cats will be used in the revamped system - I am now very wary of new grafix drivers.
Let's be honest here - since 3.1 cats there has not been really any significant increase in real world speed for all the new cats.
Considering the speed at which 3.9's came out I think that the 3.8's were flawed but no one will admit that.

Gas
Reply With Quote
  #12  
Old 11-25-2003, 06:15 AM
Gaspode
 
Posts: n/a
Default

OK
tried the 97 in the ecs mobo system and got relics in bios - practically just after boot up - and when I took the card out is was a lot cooler than it had been in the nforce2 mobo's.

didn't have a lot of time to experiment last night - so I think I will try her again in the ecs system and try changing voltages etc.
(if I can see the screen that is - the corruption was pretty bad)

Gas
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:49 PM. Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Forum style by ForumMonkeys.