Hi,
I got a Gigabyte GA-7VRXP motherboard couple weeks ago. I configured RAID-0 with 2 x Maxtor ATA133 60GB drives. I discovered that the RAID-0 confguration is very slow. The SIS Sandra Drive Index only get ~10% more than using a single ATA133 disk. The following is my SIS Sandra File System result:
No RAID with single Maxtor ATA133 60GB drive: ~26k.
RAID-0 with 2 x Maxtor ATA133 60GB drives: ~29k.
As compare to my ASUS A7V-266E motherboard with an ATA100 RAID-0 configuration, it reaches ~40k.
My conclusion is that don't be fooled by this motherboard's RAID capability. If you need to use the RAID configuration, choose another manufacturer.
If you need more info, go to the following site:
http://groups.google.com/groups?hl=e...board.gigabyte
There were several posting on similar problem with other Gigabyte motherboards.
Ray