Forums have moved

#2 12-16-2002, 05:25 PM

Are you sure you don't have to install the drivers first? I have a 3com and I had to install the drivers and then shut the pc down and put the modem in the system. After installing the modem, it was detected and setup finished installing the drivers.

Dunno if it's the same for you but you might want to give it a shot.

Also, you might need to put the DSL modem in a bus matering PCI slot. This is usually one or two of the first slots nearest the AGP slot. After you install the modem, go into bios and force an update ECSD.

One other thing, what OS?

Forums have moved

See this announcement for more details, or just go directly there.