PolarFlow Milled Water Block Review

[Jason]

UPDATE!

This waterblock was just used in an AMD Barton Based Motherboard and has produced excellent results.

AMD Barton 2500+
NF7-S Motherboard Bios 18
512 MB Geil PC 3200
Rio 180 Pump
Windows XP Sp1

With Ambient Temps of 25C In this setup, the PolarFLO returned results of:

Idle: 28C
Load: 35C
System Temp: 26C

This was in a case closed environment. Excellent temperatures.

The PolarFLO enabled me to overclock the system to a maximum of
12x215=2580mhz @ 1.8vcore and an incredible 38C Idle! These temperatures cant be touched through the use of a normal heatsink even at default settings. I believe I could push the system further but either my RAM or the motherboard is limiting me.