SiSoft Sandra:
“SiSoftware Sandra (the System ANalyser, Diagnostic and Reporting Assistant) is an information & diagnostic utility. It should provide most of the information (including undocumented) you need to know about your hardware, software and other devices whether hardware or software. It works along the lines of other Windows utilities, however it tries to go beyond them and show you more of what’s really going on. Giving the user the ability to draw comparisons at both a high and low-level. You can get information about the CPU, chipset, video adapter, ports, printers, sound card, memory, network, Windows internals, AGP, PCI, PCI-X, PCIe (PCI Express), database, USB, USB2, 1394/Firewire, etc.”
Processor Arithmetic:
 |
Processor Multi-Media:
 |
Memory Bandwidth:
 |
Memory Latency:
 |
What we see here is very impressive, not because the MSI NF980-G65 continually places in the top 2 to 3 spots, instead because the only motherboard/processor combo that trumps it are the Intel i 940, Intel QX9770 and the Intel QX9650 both of which are not even in the same price category as our AMD Phenom II 965. At a minimum price differential of more than $240 at the time of this writing you can save that cash for a higher end video card or more ram. This is a win/win scenario for MSI here delivering excellent performance without the needless cost overhead.
This might be off topic but I have just fInished assembling a new RIG using the nf980-g65 MB. Have checked all the connections the board lights up all fans run GPU CPU Case etc. The blue APS light is on. The DVD drive is live at least the drawer opens and closes and the green light comes on and goes off as it should. Not so sure about the HDD. How do I check that? Not getting any beeps. Not sure if this board has a speaker? Can’t find any built in the case either. Anyhow to get to the point I do not get a post screen. Can’t install OS or MB drivers. The lights are on but nobody’s home.
NF980-G65
Phenom ll x4 965 Black
4gb DDR3 CL9 Kingston 1333mhz
MSI N465GTX (OC to 470 Specs)
PSU OCZGXS850
500 gb SATA ll Seagate HDD
Sony DVD
Well first unplug everything but the power connections,CPU,RAM. I assume you are using aftermarket vid or onboard vid. Make sure the power to the vid is plugged in right. Then start. if that doesnt work, post back here and we can go to the next step.
Hi Jason
Thanks for your input. I did what you said and it booted to post. Now I’m just tweaking everything up. For a while I thought a piece of hardware or a short at the MB / Case was at fault and I would have to start from scratch again. But as it happened I disconnected all the hardware pulled the ram and moved one stick to another channel and away it went. So thanks for help.
Ron
This may be a dead subject…but after having this board for months it has started not posting. I have to turn the power on….wait a few seconds then hit the reset button…sometimes 2-3 times before it posts….sooo frustrating.
Finally I just bought the crosshair extreme. Im in a jam because I have the AMD 1090T and two GTX580’s…tough to find an AMD board that supports SLI.
here is my rig http://www.youtube.com/watch?v=35g_mnlG0ME
How is this board still running for you? I have heard that it has its faults and quite a few of them actually POP* and generate smoke/sparks when overclocked.