3D Mark Vanatage:
3DMark Vantage is a PC benchmark suite designed to test the DirectX10 performance of your graphics card. They’ve been making 3DMark for over 10 years, with each new edition using the latest 3d technology to determine real-world performance. A 3DMark score is an overall measure of your system’s 3D gaming capabilities, based on comprehensive real-time 3D graphics and processor tests. By comparing your score with those submitted by millions of other gamers you can see how your gaming rig performs, making it easier to choose the most effective upgrades or finding other ways to optimize your system. 3DMark is widely used by the PC industry, press and media as well as individual users and gamers, for comparing performance levels between whole systems or even specific components. Lets see how the testing for 3D Mark Vantage turned out:
 |
As you can see our test setup returned very good results for a single card setup. This just demonstrates that the MSI NF980-G65 even when equipped on a budget will handle all your current game titles with ease.
PC Mark Vantage:
PCMark® Vantage is the first objective hardware performance benchmark for PCs running 32 and 64 bit versions of Microsoft® Windows Vista®. PCMark Vantage is perfectly suited for benchmarking any type of Microsoft® Windows Vista PC from multimedia home entertainment systems and laptops to dedicated workstations and hi-end gaming rigs. Regardless of whether the benchmarker is an artist or an IT Professional, PCMark Vantage shows the user where their system soars or falls flat, and how to get the most performance possible out of their hardware. PCMark Vantage is easy enough for even the most casual enthusiast to use yet supports in-depth, professional industry grade testing.
This might be off topic but I have just fInished assembling a new RIG using the nf980-g65 MB. Have checked all the connections the board lights up all fans run GPU CPU Case etc. The blue APS light is on. The DVD drive is live at least the drawer opens and closes and the green light comes on and goes off as it should. Not so sure about the HDD. How do I check that? Not getting any beeps. Not sure if this board has a speaker? Can’t find any built in the case either. Anyhow to get to the point I do not get a post screen. Can’t install OS or MB drivers. The lights are on but nobody’s home.
NF980-G65
Phenom ll x4 965 Black
4gb DDR3 CL9 Kingston 1333mhz
MSI N465GTX (OC to 470 Specs)
PSU OCZGXS850
500 gb SATA ll Seagate HDD
Sony DVD
Well first unplug everything but the power connections,CPU,RAM. I assume you are using aftermarket vid or onboard vid. Make sure the power to the vid is plugged in right. Then start. if that doesnt work, post back here and we can go to the next step.
Hi Jason
Thanks for your input. I did what you said and it booted to post. Now I’m just tweaking everything up. For a while I thought a piece of hardware or a short at the MB / Case was at fault and I would have to start from scratch again. But as it happened I disconnected all the hardware pulled the ram and moved one stick to another channel and away it went. So thanks for help.
Ron
This may be a dead subject…but after having this board for months it has started not posting. I have to turn the power on….wait a few seconds then hit the reset button…sometimes 2-3 times before it posts….sooo frustrating.
Finally I just bought the crosshair extreme. Im in a jam because I have the AMD 1090T and two GTX580’s…tough to find an AMD board that supports SLI.
here is my rig http://www.youtube.com/watch?v=35g_mnlG0ME
How is this board still running for you? I have heard that it has its faults and quite a few of them actually POP* and generate smoke/sparks when overclocked.