Search Form

Sparkle 1250 Watt Modular Power Supply


•      80 Plus Gold Certified

•      Double Ball Bearing Fan

•      All connector AU coating to keep Ultra high efficiency

•      Full Thermal Control with super silent fan

•     12V peak at 120A

•      Temperature control design mode

•      Active PFC design

•      Keep PSU fan running for 5-10 seconds after shut down to dissipate the remaining system heat and prolonging system lifetime.

•      Ultra-quiet 13.9cm Fan with intelligent RPM control guarantees cool performance and silent operation.

•      99.9% 12V Power

•      EPS12V PSU with 99.9% 12V output capability

•      Double main electrolytic capacitors

•      DC to DC circuitry design with solid capacitors

•      Forward Safe Guard Circuitry design

•      Dual Layer main PCB 2.0mm thickness

•      Six 12V Rails

•      100A Mosfet 12V Rectifiers (more efficient at converting AC to DC)

•      30k µF low ESR secondary 105℃ electrolytic capacitors

•      Triple AC EMC Filtering stage

•      Dual capacitors design to protect system safety when sudden shut down

What is Active PFC and why do you want it?

Power Factor Correction (PFC), is a means of correcting the actual input voltage to be closer to the ideal input voltage. This in turn boosts the overall efficiency of the system. Because Active PFC uses a circuit to correct power factor, it is able to generate a theoretical power factor of over 95%. Active Power Factor Correction also markedly diminishes total harmonics, automatically corrects for AC input voltage, and is capable of a full range of input voltage. Since Active PFC is the more complex method of Power Factor Correction, it is more expensive to produce than a Passive PFC power supply.


Series Gold Class
Intel Specification ATX12V / EPS12V
Energy Efficiency 80Plus Gold
Modular Cabling Yes
Fan 139mm Fan
Fan Type Double Ball Bearing
+12V Rail 6
AC Input Range Full Range: 90~264Vac
Frequency 50/60Hz
Input Current 15-8A
+5V 30A
+3.3V 30A
+12V1 20A
+12V2 20A
+12V3 20A
+12V4 20A
+12V5 20A
+12V6 20A
-12V 0.6A
+5VSB 3.0A
Total Power 1250W
24P Mainboard Connector X 1
4+4P CPU +12V Connector (EPS 12V)
X 1
6+2P PCI-E Connector X 6
SATA Connector X 12 (Max.)
4P Molex Connector X 9 (Max.)
4P FDD Connector X 3 (Max.)
Dimension 175mm X 155mm X 86mm

The specs on this PSU are definitely enough to handle the most power hungry of systems. With 12 SATA power connectors, this PSU can handle all of your storage power requirements as well. Aside from some rack mount storage cases, I don’t know of any that can stock hold up to 12 drives. This PSU also has the ability to power 3 floppy drives at the same time. Is this necessary? Probably not. Most people don’t even use floppy drives any more. I still keep one around for emergency data recovery stuff and if Murphy’s Law comes into effect.

left arrow  Previous Page                  Next Page  right arrow


  1. […] Sparkle 1250 Watt Modular Power Supply | TechwareLabs […]

  2. […] Sparkle 1250 Watt Modular Power Supply | TechwareLabs […]

  3. […] Jumper 550 @ Hardware SecretsSparkle 1250w @ TechwareLabsSparkle 1250w @ DragonSteelModsSparkle 1250w @ […]

  4. […] Sparkle 1250 Watt Modular Power Supply | TechwareLabs […]

  5. […] Sparkle 1250 Watt Modular Power Supply | TechwareLabs […]

  6. […] This post was mentioned on Twitter by ChrisTWL, Cory Blomenkamp, Tom Gowing, mattandroTWL, willhalsteadTWL and others. willhalsteadTWL said: Review: Sparkle 1250 Watt Modular Power Supply – […]

Join in, share your thoughts

You must be logged in to post a comment.